Difference between revisions of "Install Raspbian get connected and basic networking"

From csn
Jump to navigation Jump to search
(Created page with "In this lab we will get Raspbian installed on the Raspberry Pi. You can follow any approach that you like to get Raspbian or NOOBs onto your SD card. See: *https://www.raspb...")
 
Line 1: Line 1:
−
In this lab we will get Raspbian installed on the Raspberry Pi. You can follow any approach that you like to get Raspbian or NOOBs onto your SD card. See:
+
In this lab we will show you how you can get started with your Raspberry Pi. Some of you may have done this before and there are easier ways to do this. The most simple way to get started with a Raspberry Pi is to buy a pre-installed sd card running NOOBS. You can then plug in a monitor, keyboard and mouse.  
  
−
*https://www.raspberrypi.org/help/noobs-setup/2/
+
The aim of this unit is to teach you some fundamentals of IoT device, so it is important that you can use a serial connection on an IoT device which may not have an Internet connection. Secondly, we have devised an IoT and a unit with no additional assumptions above a laptop and a phone. So we are assuming that you don't have a spare keyboard, monitor and mouse available.
−
*https://www.raspberrypi.org/documentation/installation/installing-images/README.md
 
−
 
 
−
At this point we will assume that you have put imaged the SDcard, and put it in your Raspberry Pi. From this point depending on your circumstances, you have two options. If you have a monitor with HDMI port and a USB keyboard, then plug them all in including the power for your Raspberry Pi. If you do not have these then...
 

Revision as of 00:59, 19 May 2020

In this lab we will show you how you can get started with your Raspberry Pi. Some of you may have done this before and there are easier ways to do this. The most simple way to get started with a Raspberry Pi is to buy a pre-installed sd card running NOOBS. You can then plug in a monitor, keyboard and mouse.

The aim of this unit is to teach you some fundamentals of IoT device, so it is important that you can use a serial connection on an IoT device which may not have an Internet connection. Secondly, we have devised an IoT and a unit with no additional assumptions above a laptop and a phone. So we are assuming that you don't have a spare keyboard, monitor and mouse available.

Retrieved from "https://csn.murdoch.edu.au/mediawiki/index.php?title=Install_Raspbian_get_connected_and_basic_networking&oldid=574"